Wet-dry vacuums are unlike most other vacuums. You see, vacuums use the power of suction to remove dirt, dust, and debris from your floor. It’s a simple and basic process that has been shown, time and time again, to work very well.
In contrast to that, wet-dry vacuums don’t just use the power of suction to clean your floors; they also use water and cleaning solution. So, when you’re vacuuming, you’re also mopping your floors, and this adds an extra level of cleanliness to your floors.
|SmartCleaningTips is supported by readers. We don't want to annoy you with display ads, but we do include links to products. When you buy with our links, we may earn a commission.|
Many people are choosing to purchase wet-dry vacuums, specifically for the extra level of cleaning power that they provide. And, they aren’t that much more expensive than regular vacuums, even though the mopping is great at keeping your floors extra clean.
If you’re looking for a good wet-dry vacuum, then this guide is the right place to be. We’re going to be looking at two great wet-dry vacuums. First, we’re going to look at the BISSELL CrossWave, and you’re going to learn about the unique features and attributes that this wet-dry vacuum offers. And then, you’re going to learn about the Tineco iFloor, and what it offers as well as what distinguishes it from the BISSELL CrossWave.
What Does The BISSELL CrossWave Have To Offer?
The BISSELL CrossWave is a wet-dry vacuum. You can use it to mop and vacuum your floors. But, when it comes to vacuuming, you probably won’t have a lot of success using it on softer surfaces, such as carpets and rugs unless those carpets or rugs aren’t too thick. This is because you don’t have access to that much suction power.
However, when it comes to vacuuming on hard surfaces, you won’t have any issues. All of the dirt and dust on that floor will be vacuumed up quickly and efficiently, and there won’t be any issues or difficulties.
As for mopping, the mopping process is quite similar to that of using a traditional mop. You pour some water into one tank, and then you pour some cleaning solution into another tank. As you are mopping, water and cleaning solution comes out of the cleaning head, and you use the brush to scrub all of it up, so that you can remove the dirt, gunk, and stains that are on your floor.
If you don’t own a mop, but want to, then the BISSELL CrossWave is a great choice, because it has an excellent mopping system. For vacuuming, as mentioned earlier, it isn’t always the greatest, but it does work very well on hard floors.
This is through the use of a small motor that gives you a decent amount of suction, as well as a Dual Action Multi Surface Brush Roll. This brush roll uses two brushes. One of these brushes is made of nylon, and the other is made out of microfiber. These two brushes are used for mopping and vacuuming, often at the same time.
On the handle, there are a few different buttons. These buttons allow you to choose which cleaning mode you are currently using, and what buttons you need to press, among other things. If you want to clean on soft floors, you can press a button.
If you want to spray some cleaning solution onto the floor, you can press another button. If you would like to stop mopping, but continue vacuuming, you can press a button. It’s a simple and easy set up that, when combined with the lightweight nature of the vacuum, makes it very easy to use.
Ultimately, if you’re looking for a great wet-dry vacuum, then the BISSELL CrossWave is a fantastic choice! It gives you some excellent performance, great efficiency, and a simple and easy-to-use design!
Related Bissell Steam Mop Articles
Bissell 2554A CrossWave Cordless Max Wet-Dry Vacuum
Bissell Powerfresh Deluxe Steam Mop 1806
Bissell 1940 PowerFresh Steam Mop
Bissell 2075A PowerFresh Slim
Bissell CrossWave vs. Tineco iFloor
Bissell 1940 vs. Shark S3601
Bissell Spinwave vs Spinwave Cordless vs Spinwave Plus
What Does The Tineco iFloor Have To Offer?
If you compare the Tineco iFloor to the BISSELL CrossWave, you’ll notice that the Tineco iFloor is a bit cheaper. Not by a lot, but it is the cheaper wet-dry vacuum, while also offering many of the same overall features and attributes.
What really makes the Tineco iFloor great is the fact that it’s a lightweight and easy-to-use wet-dry vacuum. Moving it around is exceptionally easy, and so is storing it, since it doesn’t weigh that much, and it’s not very big. It’s also cordless so that you will be relying on a battery, rather than a long and tangly power cord.
To use the Tineco iFloor, you need to fill up the mopping tank with water and cleaning solution. And, then you will simply push the wet-dry vacuum across the surfaces that you are cleaning. You can use this wet-dry vacuum on all kinds of different hard floors, but soft floors can be a little more difficult.
This is because, in many ways, this is more of a mop than a vacuum. While it does a good job vacuuming, you’ll have more success with using this wet-dry vacuum to mop.
While you are mopping, you can also vacuum. These two processes can take place at the same time. If you’re mopping a dirty floor, the vacuum can remove any leftover specs of dirt and grime that the brush didn’t pick up. To do this, you’ll be using a fairly basic brushroll that scrubs the floors and picks up any dirt, dust, or grime that it comes into contact with.
What’s cool about this brushroll, though, is that it cleans itself. When it’s full of dirt and gunk, instead of you having to remove all of that stuff from it, it cleans itself. You just need to press a button, for this to happen.
Overall, the Tineco iFloor is a very good wet-dry vacuum. It’s a very good wet-dry vacuum that is fairly inexpensive, super easy-to-use, gives you some great cleaning power, and is, overall, an excellent wet-dry vacuum.
One thing to remember, though, is that this is a cordless wet-dry vacuum. You’ll be relying on a battery instead of a cord, which means you will need to charge this battery on a fairly regular basis.