Garment steamers are a lot like steam cleaners, or clothing irons. But, instead of using steam to clean your floors, they use steam to remove wrinkles and creases from your clothing, as well as from things like curtains, sheets, blankets, along with many other garments.
Today, garment steamers are very inexpensive. You don’t have to spend much to purchase an excellent garment steamer. And, the technology is only getting better and better. In the past, it was rather clunky. But today, it’s excellent, and you can use it on any garment!
In this buying guide, you’re going to learn about four different garment steamers. You’re going to learn about the PurSteam Garment Steamer, the Lemontec Garment Steamer, the iSteam Garment Steamer, and then the URPOWER Garment Steamer.
Each one of these garment steamers has its unique features and capabilities. And you’re going to learn what those features and capabilities are, so that you can find the best garment steamer for your garment steaming needs!
|SmartCleaningTips is supported by readers. We don't want to annoy you with display ads, but we do include links to products. When you buy with our links, we may earn a commission.|
What Are The Features Of The PurSteam Garment Steamer?
The PurSteam Garment Steamer is a “travel steamer”. It’s small, lightweight, and if you travel, you can pack it with you. It’s a great tool to have around, especially if you need to pack and unpack clothing.
To use this garment steamer, you need to fill up a small water tank. This water tank has a maximum capacity of 180ML. Through the use of a 900 Watt heating element – one of the most powerful heating elements found in any garment steamer – this water is heated up in around a minute, to ninety-seconds.
When the water has been heated up, and you can use the steam, you can just press the tip of the PurSteam Garment Steamer onto the garments you need to steam, and then move it across those garments. In a matter of moments, the wrinkles and creases will be removed, and things will look a lot nicer!
You can use this garment steamer on a variety of different garments. But, garments made of linen, wool, cotton, and satin tend to be the easiest to steam. Of course, you can use it on plenty of other materials, and it will work just fine.
While the PurSteam Garment Steamer is certainly a very mobile and easy-to-use garment steamer, there is one attribute that many people find somewhat annoying especially since it contrasts with the overall mobility that this garment steamer offers.
This is a travel garment steamer, and it is quite mobile, but you have to use a power cord for it to work. Now, this cord is nine-feet long, which is a decent length, but it does inhibit the mobility of the garment steamer, and can make it a little more difficult to use.
In the end, though, if you don’t mind having a power cord, and would like a very inexpensive garment steamer that is mobile, easy-to-use, and quite powerful, then the PurSteam Garment Steamer is a fantastic choice!
What Are The Features Of The Lemontec Garment Steamer.
The Lemontec Garment Steamer is not unlike the PurSteam Garment Steamer. It’s a simple and easy-to-use garment steamer that you can take with you when you travel, and use on a wide variety of different garments and materials.
In order to use the Lemontec Garment Steamer, you’re going to need to pour some water into the water tank. This water tank can hold a total of 180ML of water. And, it takes about seventy-seconds for this 180ML of water to fully heat up, so that you can then use it.
From that 180ML of heated water, you have access to nine-minutes of steam. This is plenty of time to remove wrinkles and creases from a stack of laundry, or to work on some sheets or curtains that are creased and wrinkled. For an especially long garment steaming job, you’re probably going to need to refill the garment steamer at least once or twice.
What’s nice about the design of this garment steamer is that you can see how much water you have left by looking at the side. On the side of the garment steamer, there is a window that shows you a measurement of how much water you have. That way, you can see when you’re about to run out of water, and you can then refill the garment steamer so that you can continue to use it.
While that design feature is super nice, the best attribute of the Lemontec Garment Steamer is simply the mobility and convenience that it offers. This is an incredibly simple and easy-to-use garment steamer that you can bring with you wherever you go, use at any time, and even if you’ve never used it before, it’s easy to figure out how to use it.
If you’re looking for a sleek, well-designed, mobile, and fairly powerful garment steamer, then the Lemontec Garment Steamer is a wonderful choice! But, it is important to keep in mind that the Lemontec Garment Steamer does use a power cord, and while this power cord is longer than the one found in the PurSteam Garment Steamer, it can still be a little restrictive.
What Are The Features Of The iSteam Garment Steamer?
The iSteam Garment Steamer is, just like the previous garment steamers, a travel garment steamer. It’s designed to be used while you are traveling or on the go, but it can be used at home, too.
What defines the iSteam Garment Steamer is mobility and ease-of-use. Every little aspect of the design is quite specific and clear. Using the iSteam Garment Steamer is not, in any way, challenging or difficult.
Using the iSteam Garment Steamer is a process that is not unlike the other garment steamers that are available. You just need to fill up a water tank, plug the garment steamer in, and then allow the water to heat up and turn into steam. It only takes about sixty-seconds, or so, for all of the steam to fully heat up. And then, when it does, the steam will come out of a panel that is on the tip of the steamer.
This panel has five little holes for the steam to pass through. These aren’t big holes, so the steam passes through relatively slowly. When you are moving the steam cleaner across clothing, and other garments, these little holes prevent water from seeping out and staining the garments you are steaming, but they also ensure that just enough steam comes out, to remove the wrinkles and creases off of the garments. It’s an incredibly precise and methodical process that, while somewhat slow, ensures that every garment you steam looks very nice, and that there aren’t any visible flaws or blemishes that might make it look bad.
Ultimately, the iSteam Garment Steamer is a fantastic garment steamer! It has a sleek and attractive design that clarifies every component and key feature of the garment steamer. Using it is easy, and since it’s small, storing it and traveling with it is easy as well. But, the best feature is probably the fact that it gives you plenty of steam power to completely unwrinkle your garments, and to make them look fantastic!
What Are The Features Of The URPOWER Garment Steamer?
Out of all the garment steamers in this guide, the URPOWER Garment Steamer is easily the cheapest. It’s super inexpensive, very lightweight, and it gives you a couple of excellent features that make the garment steaming an absolute breeze!
When you look at the URPOWER Garment Steamer, you’ll notice that you can see the amount of water that is in the tank, at any time. On the side, there is a little window, and a little measuring print, that tells you how much water you have left. If you need to refill it, you’ll know. And, if it’s full, you’ll know that, too.
To use the URPOWER Garment Steamer, you’re going to need to fill up that water tank. And, what’s different about this water tank is that it’s pretty small. Instead of having 180ML of capacity, the URPOWER Garment Steamer gives you 130ML of capacity.
In two-minutes, that 130ML of water is completely heated up. That’s a longer period, in comparison to some of the other garment steamers you’ve just learned about, and it can be a little annoying having to wait that long for the steam to fully heat up.
While that isn’t a lot of steam, it does last for around seven-minutes, to ten-minutes. This depends on how intense the steaming is and if you’re using it continuously, or turning the garment steamer on and off and then using it later. But, if you are doing longer cleanings, having to wait another two-minutes just to have some more steam can be a bit annoying.
In that period of seven-to-ten-minutes, you’ll be able to steam at least a few garments. But, for something a bit bigger, such as bedding, it might take longer. And that’s because this garment steamer isn’t designed for larger garments, such as bedding or large curtains. Instead, it’s mostly just designed for clothing. Clothing such as shirts, pants, underwear, socks, and various other items. Even pants can be a little difficult to steam, though.
What makes the URPOWER Garment Steamer great, is its portability, small form-factor, and convenience. Sure, certain aspects of the URPOWER Garment Steamer aren’t as convenient as they could be, but overall, using this garment steamer is an easy and effortless experience.
In the end, the URPOWER Garment Steamer is a very well-designed garment steamer. It looks nice, it feels good when you’re holding it and using it, you have access to enough steam power for all of your clothing, and it provides a nice and easy garment steaming experience! If that’s what you need, then the URPOWER Garment Steamer is a fantastic choice!
Owning a garment steamer is great, because you never need to worry about your clothes being wrinkled or creased, and you never need to worry about what to do when that happens.
In this guide, you learned all about four different garment steamers. Each one of these garment steamers was a “travel garment steamer”, and these are fantastic garment steamers that you can store easily, and take with you wherever you go.
Travel garment steamers are excellent for that reason, and if you purchase a garment steamer, it’s best to purchase a garment steamer due to the power, mobility, and convenience they give you.
Since you’ve read this buying guide, you’re not going to have any problems finding the best garment steamer for your garment steaming needs!